Submersible pump (ATEX) to be used for pumping bilge water on ADN vessels according to: Ex II 2G – db IIB T4 Gb – Ex h IIB T4 Gb – IP68.

Pump type: Submersible pump
Float switch: No
Voltage: 400 V
ATEX: Yes
Protection class: IP68
Pipe diameter press: 2.1/2″
Suction pipe diameter: –
Medium: Water
Medium: Water with coarse components
Grain size: 30 mm
Max. delivery head: 18.0 m
Voltage: Alternating voltage
Frequency: 50 Hz
Vrije uitloop (L/uur): 75.000
Capaciteit 5 meter (L/uur): 64.000
At 10 meters: 37,000 liters per hour
At 15 meters: 10,000 liters per hour

Type: DRG
Colour: Grey
Pump type: fully submersible centrifugal pump
Type of impeller: open impeller or single-channel impeller
Engine type: dry engine
Immersion depth: 5 meters
Fuse: at 400 volts a motor protection switch in the cable is necessary
Shaft seal: drivelube seal system, oil chamber with 2 shaft seals, both wear-resistant silicon carbide on silicon carbide and extra lip seal at engine bearing
Impeller material: cast iron EN-GJL 250
Impeller housing material: cast iron EN-GJL 250
Motor housing material: cast iron EN-GJL 250
Pump shaft material: stainless steel AISI 431

Liquids: contaminated water with solid components, maximum temperature +40°C
Insulation class: IP68
ATEX: II 2G
ATEX: Ex db IIB T4 Gb
ATEX: Ex h IIB T4 Gb

Pumps away up to: 70 mm maximum
Grain size: 30 mm maximum
Connection: 2.1/2″ female thread
Dimensions: diameter 327 mm (incl. knee), height 581 mm
Weight: 33.0 kg
Amperage: 3.7 A
Shaft power: 1.8 kW, 2.4 hp, 2900 rpm
Cable: 10 meters neoprene H07RN-F without plug